Get the best quality hydraulic tensioners and hydraulic bolt tensioners. 

Our hydraulic bolt tensioning tool stands out from the competition. It allows you to tighten large-diameter bolts to high preloads quickly, safely, and accurately. Unlike other tools such as impact wrenches, flogging spanners, and hydraulic tensioners, our tool doesn’t rely on torque or forceful turning of the nut or bolt. It’s a pressure-driven bolt tensioner, an annular jack that fits over the fastener and nut to fixes. The power delivered by the jack applies directly to the furthest limit of the bolt, creating a pressure equivalent to the load produced by the jack in the knife of the bolt. With this pressure, you can tighten the nut without any force until it’s tight. 

Extended for varied operations 

The heap applied by the jack then loose, and a high rate, contingent upon the length and width of the bolt, is held in the knife of the bolt. When you have a stud or a bolt, it isn’t easy to envision that this durable article can go about as a spring. The latches in a shot joint do precisely that, as a matter of fact. They should extend at gathering with sufficient power to keep the joint immovably clasped together when it is put in assistance. The fixing strategy will assist you with controlling the huge expenses that come with inaccurately fixed studs.

Keeping basic gear bolt tensioning 

In hard-core applications inside the oil and gas industry, appropriate bolt tensioning is urgent for guaranteeing the honesty and well-being of basic gear like pipelines, ribs, and strain vessels. Accomplishing and keeping up with exact and uniform bolt pressure is fundamental to forestalling spills, keeping up with primary respectability, and staying away from excessive personal time. Hydraulic-driven tensioners have arisen as a favored decision for rock-solid bolt tensioning in the oil and gas industry. Hydraulic-driven Tensioners and Hydraulic-powered Stud and Bolt Tensioners have a high ability to-weight proportion. They are lighter, less massive and a lot simpler to use than force instruments. 

Slugging wrenches and seizing 

One person can operate most applications with less effort. The heaviness of any of these parts is normally essentially not exactly the heaviness of the Hydraulic-driven wrench and attachment for a similar stud size and fixing limit. Compared to slugging wrenches and bolt heaters, hydraulic studs and bolt tensioners are quieter and safer to operate. Pressure-driven Stud Tensioning disposes of string irritation and seizing. While utilizing Hydraulic-driven tensioners, the strings and nut contact surfaces don’t see the high contact pressures that cause annoying problems. The jack pushes against the blasted joint and pulls on the finish of the bolt. 

Control closely variables

A hydraulic tensioner is a specific reason for A driven chamber. The hydraulic cylinder’s area and the Pump’s hydraulic pressure are directly related to the tension applied to a stud. The hydraulic bolt tensioner price is extremely accurate because we closely control these variables. As a result, hydraulic tensioners will enable you to load and tighten studs precisely in a straightforward and repeatable manner. The joint can fall flat assuming the heap in the studs is excessively low, excessively high, or, on the other hand, on the off chance that it isn’t uniform from one stud to another.

Leave a Comment